en-USde-DEzh-CN
喇叭口泵管
Flared Tubing Example

新!喇叭口泵管

  在您的ICP-MS上是不是很难将样品管插入到蠕动泵管内?特别是当蠕动泵管的内径(ID)比较小时。比如通常用作内标的泵管内径为0.2到0.4mm,而这与外径为1.3mm的样品管就很难连接。因此使用喇叭口的泵管就可以完全解决这个问题,将较粗的样品毛细管插入其中。         

ICP-OES - ICP-MS - Segmented Flow

Flared Tubing.com  was established to provide laboratories a one stop source for both Standard (non flared) and Flared Peristaltic Pump Tubing used on an ICP-OES / ICP-MS. 

We are the largest in stock supplier of Standard and Flared Peristaltic Pump Tubing in the world.

We pride ourselves on our customer service and endeavor to provide a fully comprehensive range of peristaltic pump tubing products.

Flared TubingWhy Flared Tubing?

It can be difficult to insert the sample tube into the peristaltic pump tubing on your ICP-MS / ICP-OES. This is particularly so if the peristaltic pump tubing has a small internal diameter (ID). An example is the pump tubing used for the internal standard which usually has an ID of 0.2 to 0.4mm and is incompatible with the sample tubing OD of 1.3mm. The flared end of this pump tubing allows the larger sample capillary tubing to be inserted.

  • • 供应与常规泵管相同的所有型号的喇叭口泵管,包括PVC 2-卡和3-卡,Solva 2-卡和3-卡,Viton® (Acidflex), Tygon® (Flowrated), and Santoprene®等。
    • 订购喇叭口泵管时,在常规的零件号前加上前缀F,如F116-0549-04 =org/grn 0.38 mm ID 喇叭口蠕动泵管。

If you have a requirement for long pump tubing or shorter we will manufacture pump tubing to your specifications.We specialize in custom lengths, tube flaring sizes and tubing harness assembly.

Purchase flared pump tubing for you ICP-OES / ICP-MS direct from the Flared Tubing Manufacturer today.