New! Flared End Pump Tubing

It can be difficult to insert the sample tube into the peristaltic pump tubing on your ICP-MS / ICP-OES. This is particularly so if the peristaltic pump tubing has a small internal diameter (ID). An example is the pump tubing used for the internal standard which usually has an ID of 0.2 to 0.4mm and is incompatible with the sample tubing OD of 1.3mm.The flared end of this pump tubing allows the larger sample capillary tubing to be inserted.

ICP-OES - ICP-MS - Segmented Flow

Flared Tubing.com  was established to provide laboratories a one stop source for both Standard (non flared) and Flared Peristaltic Pump Tubing used on an ICP-OES / ICP-MS. 

We are the largest in stock supplier of Standard and Flared Peristaltic Pump Tubing in the world.

We pride ourselves on our customer service and endeavor to provide a fully comprehensive range of peristaltic pump tubing products.

Why Flared Tubing?

It can be difficult to insert the sample tube into the peristaltic pump tubing on your ICP-MS / ICP-OES. This is particularly so if the peristaltic pump tubing has a small internal diameter (ID). An example is the pump tubing used for the internal standard which usually has an ID of 0.2 to 0.4mm and is incompatible with the sample tubing OD of 1.3mm. The flared end of this pump tubing allows the larger sample capillary tubing to be inserted.

• We flare PVC 2-shoulder and 3-shoulder, Solvaflex 2-shoulder and 3-shoulder, Viton® (Acidflex), Tygon® (Flowrated), and Santoprene®.
• When ordering flared pump tubing prefex the part number with F eg F116-0549-04 = org/grn 0.38 mm ID Flared Peristaltic Pump Tubing.

If you have a requirement for long pump tubing or shorter we will manufacture pump tubing to your specifications.We specialize in custom lengths, tube flaring sizes and tubing harness assembly.

Purchase flared pump tubing for you ICP-OES / ICP-MS direct from the Flared Tubing Manufacturer today.